Loading ...
Loading ...
Loading ...
39
Screen Messages
Messages display when additional input is needed before proceeding. There are mainly
three main types of on-screen messages: Confirmation, Warning, and Error.
Confirmation Messages
This type of messages usually displays as an "Information" screen, when you are about
to perform an action that cannot be reversed or when an action has been initiated and
your confirmation is needed to continue.
When a user-response is not required, the message displays briefly.
Warning Messages
This type of messages displays when completing the selected action may result in an
irreversible change or loss of data. An example of this message is the "Erase Codes"
message.
Error Messages
Error messages display when a systemic or procedural error has occurred. Possible
errors include cable disconnection and communication interruption.
Making Selections
The New Energy application is a menu-driven program that presents a series of options
one at a time. As you select from a menu, the next menu in the series displays. Each
selection narrows the focus and leads to the desired test. Use your fingertip or the stylus
pen to make menu selections.
Auto Scan
The Auto Scan function, which can be used to start auto scanning for all the available
systems on the vehicle, will be listed on the Navigation Bar when accessing diagnosis
function. The main section of Auto Scan screen displays a System List for most vehicles,
a topology map at the same time for some vehicles, including Volkswagen, Audi, BMW,
Ford, Land Rover, Jaguar, Chrysler, Fiat, Volvo, etc.
To perform Auto Scan function
Take topology for BMW as an example:
1. Tap the New Energy application on the MaxiSys Job Menu. Choose the
corresponding vehicle information and enter the vehicle diagnostic page.
2. The Topology tab page displays in the main section. Tap the Fault Scan button
at the bottom of the screen to scan the vehicle system modules.
Loading ...
Loading ...
Loading ...