Loading ...
Loading ...
Loading ...
253
According to the trigger setting condition, the trigger waveform will be captured when the
signal meets the trigger condition. When capturing waveforms, you can manually set the
trigger conditions. When the device is capturing the signal, tap the left column of the
Trigger button to activate the trigger function. A trigger point displays as a blue point .
Figure 9-138 Trigger Button Screen
The edge trigger is one of the most common trigger modes and is activated when voltage
rises above or falls below a preset threshold. This trigger type allows you to configure
the trigger mode, threshold, trigger channel and pulse direction settings. Tap Done to
save the settings or tap Cancel to exit without saving.
When the device is capturing the signal, tap the right column of the Trigger button to
open the trigger settings dialog box.
Loading ...
Loading ...
Loading ...