Loading ...
Loading ...
Loading ...
10
LED
Color
Description
Red
Lights red when the battery level is above 10% but
below 25%.
Flashes red when the battery level is below 10%.
Table 2-6 Vehicle LED Description
LED
Color
Description
Vehicle
Green
Lights solid green when connected via USB cable .
Flashes solid green when communicating via
USB/Ethernet cable.
Blue
Lights solid blue when connected via Ethernet
cable/Bluetooth.
Flashes solid blue when communicating via
Bluetooth.
Cyan
Lights solid cyan when connected via Wi-Fi.
Flashes solid cyan when communicating via Wi-Fi.
NOTE
Sometimes the vehicle LED lights yellow when the VCMI device is connected by other
tablets. Please wait for 2 minutes to automatically disconnect them, or when the Wi-Fi
signal is weak, please try to reconnect the VCMI.
Communication Capability
The Vehicle Communication and Measurement Interface supports Bluetooth (BT), Wi-Fi
and USB communications. It can transmit vehicle data to the tablet with or without a cable
connection. In open areas, the working range of the transmitter through BT
communication is up to 328 feet (100 m). The working range of 5G Wi-Fi is up to 164 feet
(50 m). If the signal is lost due to being taken out of range, communication will be restored
once the tablet is within range.
Measurement Capability
The VCMI device is designed with the functions of multimeter, oscilloscope, waveform
generator, and bus inspection. The parameters such as voltage, resistance, current,
signal frequency, and voltage-time characteristic of the signal can be measured and the
results are displayed on the tablet.
Programming Capability
The VCMI device is a D-PDU, SAE J2534 & RP1210 compliant PassThru programming
interface device. Using the updated OEM software, it is capable of replacing the existing
software/firmware in the Electronic Control Units (ECU), programming new ECUs , and
fixing software-controlled drivability issues and emission issues.
Loading ...
Loading ...
Loading ...