Loading ...
Loading ...
Loading ...
247
To select and unselect the channel
1. Tap the zero baseline marker or the Y-axis (the line thickens when selected) .
2. Tap the zero baseline marker or the Y-axis again to exit the channel selection.
Waveform Zooming
The zooming function allows you to change the size and position of a signal during or
after capturing a waveform to examine. It does not change the stored data, only the way
it displays.
The X- axis and Y- axis can be zoomed using your fingertips. The waveform can be
zoomed during or after capturing the signal.
Measurement Rulers
In the coordinate grid, there are two types of measurement rulers, which allow the
amplitude and time duration of a waveform to be measured precisely. They are useful
when determining signal characteristics such as amplitude at specific points, the cycle
time (duration) and frequency.
The vertical Time Ruler — Tap the Ruler Activator in the bottom left corner of the grid
and drag it across the screen to the desired position. A Time Ruler is generated.
The horizontal Signal Ruler — The Signal Ruler can be generated in the similar way by
clicking the Ruler Activator in the top right corner and dragging it downwards.
When dragging the Measurement Rulers, a Ruler Table showing time and voltage
values for the corresponding channels will be displayed. The Delta icon refers to the
absolute difference between the values of the rulers, which can be locked by tapping the
Lock icon. Tap the X button in the upper right corner of the ruler table to delete all rulers.
Loading ...
Loading ...
Loading ...