Loading ...
Loading ...
Loading ...
Multimeter
180
The multimeter is a multi-function and multi-range measuring instrument. When the
VCMI (Vehicle Communication and Measurement Interface) device is connected
with MaxiSys Ultra EV Tablet, you can open the Multimeter application by tapping
the Measurement icon on the Job Menu of the tablet and then tapping the Multimeter
icon, and perform the multimeter-related functions, such as measuring voltage,
current, resistance, frequency, diode, duty cycle, pulse width, and continuity test.
Safety Information
Follow the instructions below to reduce the risk of injury from electric shock and
prevent equipment damage.
Use the multimeter only as specified in this manual.
Do not apply more than the rated voltage between connectors or between any
connector and earth ground.
Do not input a value beyond the range when measuring. Remember that the
limit value range of this multimeter is 200V.
To prevent injury or death, do not use the multimeter if it appears to be damaged
in any way, and stop use immediately if you are concerned with any abnormal
operations.
To prevent injury or death, never ground yourself when taking electrical
measurements. Isolate yourself from ground by using dry rubber insulating
mats to cover all exposed/grounded metal. Ensure all clothing including gloves
are dry. Stand on rubber mats when using tool.
Use the test leads or probes supplied with the product, or proper and applicable
terminals. Inspect the test leads or probes for damage before use.
When using probes, keep fingers behind the finger guards on the probes.
Use the supplied replacement fuses or specified replacement parts.
Always consider electrical and electronic equipment to be energized ( live).
Never assume any equipment is de-energized.
When making electrical connections, connect the common test lead before
connecting the live test lead; when disconnecting, disconnect the live test lead
before disconnecting the common test lead.
When measuring current, turn off circuit power before connecting the
multimeter to the circuit. Remember to place the multimeter in series with the
circuit.
Loading ...
Loading ...
Loading ...