Loading ...
Loading ...
Loading ...
9
10. Oscilloscope LED — flashes green when operating in the oscilloscope mode
11. Vehicle LED — refer toTable 2-6 Vehicle LED Descriptionfor details
IMPORTANT
Do not disconnect the programming device while the vehicle LED status light is on. If the
programming is interrupted while the vehicle's ECU is blank or only partially programmed,
the module may be unrecoverable.
Figure 2-7 VCMI, Bottom View
12. Ethernet Port
13. Vehicle Data Connector (DB26-Pin)
14. Input Channel A
15. Input Channel B
16. Input Channel C
17. Input Channel D
Table 2-4 Power LED Description
LED
Color
Description
Power
Yellow
Lights solid yellow automatically at power up when VCMI
is self-testing.
Green
Lights solid green when powered on.
Red
Lights solid red when a system failure occurs.
Flashes solid red when VCMI is upgrading.
Table 2-5 Battery LED Description
LED
Color
Description
Battery
Green
Flashes green when VCMI is charging.
Lights green when fully charged or the battery level
is above 50%.
Yellow
Lights yellow when the battery level is above 25 % but
below 50%.
Loading ...
Loading ...
Loading ...