Loading ...
Loading ...
Loading ...
22
If the charge lamp flashes
The battery temperature is too high or too low. We recommend charging
in a location where the ambient temperature is between 10°C and 30°C.
Wipe the battery contacts with a clean, dry cloth.
CAUTION
If the number of images that can be taken on a single charge is significantly
reduced,
the
battery
is
reaching
the
end
of
its
lifespan.
Replace
it
with
a
new
one.
The
battery
can
be
charged
with
BC-71
battery
charger
(optional).
(P.159)
TIP
When AC adapter UAC-21 is connected, power is supplied to the camera
at the same time as the battery is charged, so your SIGMA fp L can now
be operated. (Leave the battery in the camera.)
If you want to give priority to charging speed, turn the power switch OFF.
CHARGING THE BATTERY THROUGH THE COMPUTER
If the USB port of your PC is type C, connect your SIGMA fp L to your PC
using the USB cable provided with the camera. If the port is type A, connect
your SIGMA fp L using a commercially available USB cable (A to C).
If you want to give priority to charging speed, turn the power switch OFF.
If you want to charge the battery or perform general camera operations,
select [Charging Only] in [USB Mode]. (P.153)
Be sure to connect the USB cable to the USB socket on your computer.
Do not connect it to the USB socket of a monitor, keyboard, or USB hub.
If
the
computer
enters
Sleep
mode
during
charging,
charging
may
be
stopped.
The time required to charge varies depending on the performance of the
computer.
TO REMOVE THE BATTERY
Slide the battery compartment cover latch
and remove the battery.
WARNING
Do not remove the battery or memory card
while the Busy Lamp is on or flashing.
Otherwise, the written data will be lost.
This could also damage the camera and/
or memory card.
Loading ...
Loading ...
Loading ...