Loading ...
Loading ...
Loading ...
Menu Reference
The “System” Tab
Red suggests the ongoing motion exceeds the threshold of detection level and sensitivity level. The
alarm will be triggered.
Triggered Action
See the section Triggered Actions (Common to All Event Types), p. 60 for information about the vari-
ous actions that can be triggered.
Click on Save to apply and store the settings.
Network Failure Detection
To edit the network failure detection settings, select System> Events> Network Failure Detection.
Network Failure Detection allows the camera to ping another IP device (e.g. NVR, VSS, Video Server,
etc.) within the network periodically and generates some actions in case of network failure occurs,
for instance, a Video Server is somehow disconnected.
Being capable of implementing local recording (through microSD/SD card) or remote recording (via
NAS) when network failure happens, the camera can be a backup recording device for the sur-
veillance system.
Detection Switch
The default setting for the Detection Switch function is Off. Enable the function by selecting On. You
can also activate the function according to the schedule time that is previously set in the Schedule
setting page. Select By schedule and click Please select… to choose the desired schedule from the
drop-down menu.
Detection Type
Input the IP device address and the period of ping time to ping. The camera will ping the IP device
every N minute(s). If it fails for up to three times, the alarm will be triggered. The ping time setting
range is from 1 to 99 min.
Triggered Action
See the section Triggered Actions (Common to All Event Types), p. 60 for information about the vari-
ous actions that can be triggered.
Click on Save to apply and store the settings.
MxMessageSystem Event
To edit the MxMessageSystem Event settings, select System> Events> MxMessageSystem Event.
68 / 130
Loading ...
Loading ...
Loading ...