Loading ...
Loading ...
Loading ...
Enable HTTPS
Check the box to enable HTTPS secure connection. Once enabled, choose one of the following
secure modes.
n
HTTP & HTTPS
Under this mode, HTTP & HTTPS secure connections are enabled.
n
HTTPS only
Under this mode, the secure connection is ensured by HTTPS only.
Click on Save to apply and store the settings.
Install new certificate
Pull down the Install new certificate drop-down list and select the certificate type. Choose one
from the following types.
n
Generate Self-signed Certificate
Before a CA-issued certificate is obtained, you can create and install a self-signed certificate
first.
Beneath Generate Self-signed Certificate, click on Create and provide the requested inform-
ation as outlined under Provide the Certificate Information, p. 46.
NOTE! The self-signed certificate does not provide the same high level of security as when
using a CA-issued certificate.
n
Generate Certificate Request
Click on Generate Certificate Request to create a certificate request for obtaining a signed
certificate from CA. Provide the requested information as outlined under Provide the Cer-
tificate Information, p. 46.
When the request is complete, the subject of the created request will be shown in the field.
Click on Properties below the Subject field, copy the PEM-formatted request and send it to
the selected CA.
When the signed certificate is returned, install it by uploading the signed certificate (see
Upload Private Key/Certificate, p. 45).
Upload Private Key/Certificate
n
Do one of the following:
n
If you have a private key file, click on Browse beneath Private key and select the
private key file.
n
If you have a certificate file, click on Browse beneath Certificate and select the cer-
tificate file.
Menu Reference
The “System” Tab
45 / 130
Loading ...
Loading ...
Loading ...