Loading ...
Loading ...
Loading ...
Preset Go
To have the camera move to a specified preset position, select the preset point from the Preset list
(click PrePage or NextPage button to reach preset number 1 to 256). The camera will move to the
target position.
Cruise
To edit cruise programming, select PTZ > Cruise.
The camera supports up to eight cruise paths. Please follow the instructions below for cruise path
setup.
Cruise Setting
Refer to the steps below to set up a cruise path.
1. Select a path number from the drop-down list.
2. Move the cursor to the live view pane, and move the camera to a desired view (PTZ controls) as
the start point of a Cruise Path.
3. Click Set button of Record Start and start programming the Cruise Path via PTZ controls.
4. When finishing programming, click the Set button of Record End to complete recording the
Cruise Path.
Cruise Run
Select the specified cruise path from the drop-down list, click the Run button, and the camera will
start touring around as recorded.
To view the camera touring in full screen mode, move the cursor onto the live view pane, right-click
and left-click to select Fullscreen. Then you can view the camera navigation in full screen.
To stop a cruise path, simply move the cursor to the live view pane and move the camera in any dir-
ection.
Auto Pan
To edit auto pan programming, select PTZ > Auto Pan.
The camera supports up to four Auto Pan paths. Please refer to the instructions below to set an
Auto Pan path.
Menu Reference
The “PTZ” Tab
109 / 130
Loading ...
Loading ...
Loading ...