Loading ...
Loading ...
Loading ...
n
Security Name
The maximum length of the security name is 32 characters.
NOTE! The valid characters are A-Z, a-z, 0-9 and !#$%&’-.@^_~.
n
Authentication Type
There are two authentication types available: MD5 and SHA. Select SHA for a higher security
level.
n
Authentication Password
The authentication password must be 8 characters or more. The input characters will be dis-
played as dots for security purposes.
NOTE! The valid characters are A-Z, a-z, 0-9 and !#$%&’-.@^_~.
n
Encryption Type
There are two encryption types available: DES and AES. Select AES for a higher security level.
n
Encryption Password
The minimum length of the encryption password is 8 characters and the maximum length is
512 characters. The input characters will be displayed as dots for security purposes. The
encryption password can also be left blank. However, the messages will not be encrypted to
protect privacy.
NOTE! The valid characters are A-Z, a-z, 0-9 and !#$%&’-.@^_~.
Traps for SNMP v1/v2/v3
Traps are used by the camera to send messages to a management system for important events or
status changes.
n
Enable Traps
Check the box to activate trap reporting.
n
Trap address
Enter the IP address of the management server.
n
Trap community
Enter the community to use when sending a trap message to the management system.
Trap Option
n
Warm Start
A Warm Start SNMP trap signifies that the SNMP device, i.e. IP camera, performs software
reload.
Menu Reference
The “System” Tab
55 / 130
Loading ...
Loading ...
Loading ...