Loading ...
Loading ...
Loading ...
CA Certificate
The CA certificate is created by the Certification Authority for the purpose of validating itself.
Upload the certificate for checking the server’s identity.
Client Certificate/Private Key
Upload the Client Certificate and Private Key for authenticating the camera itself.
Settings
n
Identity
Enter the user identity associated with the certificate. Up to 16 characters can be used.
n
Private Key Password
Enter the password (maximum 16 characters) for user identity.
Enable IEEE 802.1X
Check the box to enable IEEE 802.1X.
Click on Save to apply and store the settings.
Network
To edit the network settings, select System> Network.
Click on Network, there will be a drop-down menu with tabs including Basic, QoS, SNMP, and
UPnP.
Basic
To edit the basic settings, select System> Network> Basic.
This setting page is for setting a new IP address for the camera, configuring other network-related
parameters and activating IPv6 address (if the network supports it).
General
This setting menu is for configuring a new IP address for the camera. To setup an IP address, please
find out the network type first. Contact the network provider for it. Then refer to the network type
and follow the instructions to setup the IP address.
NOTE! If the network type is Point-to-Point Protocol over Ethernet (PPPoE), please obtain the
PPPoE username and password from the network provider.
Menu Reference
The “System” Tab
49 / 130
Loading ...
Loading ...
Loading ...