Loading ...
Loading ...
Loading ...
Host Name
The name is for camera identification. If alarm actions (see Triggered Actions (Common to All Event
Types), p. 60) are enabled and is set to send alarm messages by Mail/FTP, the host name entered
here will be displayed in the alarm message.
Time Zone
Select the time zone from the drop-down menu according to the location of the camera.
Enable Daylight Saving Time
To enable DST, please check the item and then specify the time offset and the DST duration. The
format for time offset is [hh:mm:ss]; for instance, if the amount of time offset is one hour, please
enter “01:00:00” into the field.
Time format
Choose a time format (yyyy/mm/dd or dd/mm/yyyy) from the drop-down menu. The format of the
date and time displayed above the live video window will be changed according to the selected
format.
Sync with Computer Time
Select the item, and video date and time display will synchronize with the PC’s.
NOTE! Users MUST click on Save to confirm the setting. Otherwise, the time will not be synced.
Manual
The administrator can set video date and time manually. Entry format should be identical with the
examples shown next to the enter fields.
Sync with NTP Server
Network Time Protocol (NTP) is an alternate way to synchronize the camera’s clock with a NTP
server. Please specify the server that is wished to synchronize in the entry field. Then select an
update interval from the drop-down menu. For further information about NTP, please open the web
site www.ntp.org.
NOTE! The synchronization will be done every time the camera boots up.
Menu Reference
The “System” Tab
41 / 130
Loading ...
Loading ...
Loading ...