Loading ...
Loading ...
Loading ...
IPv6 Address Configuration
If the network supports IPv6, you can check the box beside Enable IPv6 and click Save. An IPv6
address will appear beside Address, and you can use it to connect to the camera.
Click on Save to apply and store the settings.
QoS
To edit the QoS (Quality of Service) settings, select System> Network> QoS.
QoS allows providing differentiated service levels for different types of traffic packets, which guar-
antees delivery of priority services especially when network congestion occurs. Adapting the Dif-
ferentiated Services (DiffServ) model, traffic flows are classified and marked with DSCP (DiffServ
CodePoint) values, and thus receive the corresponding forwarding treatment from DiffServ capable
routers.
DSCP Settings
The DSCP value range is from 0 to 63. The default DSCP value is 0 (DSCP disabled). The camera uses
the following QoS Classes:
n
Management DSCP
NOTE! The class consists of HTTP traffic: Web browsing.
n
Stream 1~4 DSCP
NOTE! You can set the Video DSCP of each stream.
n
Video DSCP
The class consists of applications such as MJPEG over HTTP, RTP/RTSP and
RTSP/HTTP.
NOTE! To enable this function, please make sure the switches/routers in the network support
QoS.
Click on Save to apply and store the settings.
VLAN
To edit the VLAN settings, select System> Network> VLAN.
Check the box Enable VLAN to activate the VLAN function. Enter the VLAN ID. The allowed range of
VLAN ID is from 1 to 4095. The default value is 20.
Menu Reference
The “System” Tab
53 / 130
Loading ...
Loading ...
Loading ...