Loading ...
Loading ...
Loading ...
Menu Reference
The “PTZ” Tab
PTZ Setting
To edit the PTZ settings, select PTZ > PTZ Setting.
Flip (Image Flip)
You can track an object continuously when it passes under the camera by setting Flip to M.E. Mode
(mechanical mode) or digital flip Image Mode:
n
M.E. Mode
M.E. is a standard mechanical operation. As the camera tilts to the maximum angle, it will pan
180°, and then continue tilting to keep tracking objects.
n
Image Mode
The digital image flip mode allows tracking the objects seamlessly. Compared to M.E. Mode,
there is hardly any perceptible delay.
NOTE!
n
The Flip setting is only controlled manually. If a preset position or a point for other function
(e.g. a sequence) is set in the position that can only be reached through FLIP motion, when
the Flip function is turned off, the position cannot be reached any more.
n
To make the camera tilt between a specific range, such as -10° to +100° or -10° to +190°,
please go to the Tilt Range setting page to set the tilt angle range. Otherwise, the camera
will tilt 90° as the default setting.
Speed by Zoom
This function allows the camera to adjust the pan/tilt speed automatically by the internal algorithm
when the zoom ratio is changed. The rotating speed will become slower as the zoom ratio gets lar-
ger. Click on the Set button to save the setting.
Auto Calibration (Servo Feedback)
Integrating Servo Feedback technology, the camera would calibrate and precisely return to the pre-
vious position without stalling when the deviation of dome pivot is detected. Select On and click on
the Set button to activate the setting.
Set Pan Zero
Click on the Set button to set the camera’s current position as the start point for panning (0 degree).
Click on Save to apply and store the settings.
114 / 130
Loading ...
Loading ...
Loading ...