Loading ...
Loading ...
Loading ...
Menu Reference
The “System” Tab
n
Record Video Clip
Check this item and select a video recording storage type, SD Card or NAS (Network-Attached
Storage>. The Audio Detection recording will be stored in microSD/SD card or the NAS when
audio is detected.
The Pre-trigger buffer recording function allows users to check what happened to cause the
trigger. The pre-trigger buffer time range is from 1 to 3 sec. Select Upload for __ sec to set the
recording duration after audio is triggered. The setting range is from 1 to 99999 sec. Select
Upload while the trigger is active to record the triggered video until the trigger is off.
NOTE! Please make sure the local recording (with microSD/SD card) or the remote recording
(with NAS) is activated so that this function can be implemented. Refer to section Recording
for further details.
File Name
Enter a file name in the blank, e.g. image.jpg. The uploaded image’s file name format can be set in
this section. Please select the one that meets the requirements.
n
Add date/time suffix
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number
n
Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number
n
Add sequence number suffix up to # and then start over
File Name: imageXX.jpg
X: Sequence Number
NOTE! The file name suffix will end at the number being set. For example, if the setting is up
to “10”, the file name will start from 00, end at 10, and then start all over again.
n
Overwrite
The original image in the FTP site will be overwritten by the new uploaded file with a static file
name.
Click on Save to apply and store the settings.
64 / 130
Loading ...
Loading ...
Loading ...