Loading ...
Loading ...
Loading ...
Menu Reference
The “PTZ” Tab
Auto Pan Setting
Follow the steps to set up an Auto Pan path.
1. Select a path number from the drop-down list.
2. Select the speed ratio from the Speed drop-down list; the speed ratio ranges from 0 (low) to 3
(fast).
3. Choose to run the auto pan path in right/left direction from the Direction drop-down list.
4. Move the cursor to the live view pane, and move the camera to a desired view as the Start Point
of an auto pan path.
5. Click Set button of Start Point and the current view will be automatically saved as the start
point of the auto pan path.
6. Move the camera to another desired position as the end point of the auto pan path.
7. Click Set button of End Point to save the setting.
NOTE! The zoom ratio of an auto pan’s start point remains the same throughout the path.
Auto Pan Run
Select the specified auto pan path from the drop-down list, click the Run button, and the camera will
start moving horizontally as recorded.
To view the camera panning in full screen mode, move the cursor onto the live view pane, right-click
and left-click to select Fullscreen. Then you can view the camera navigation in full screen.
To stop running an auto pan path, simply move the cursor to the live view pane and move the cam-
era in any direction.
Sequence
To edit sequence line programming, select PTZ > Sequence.
The camera supports up to eight sequence lines; each sequence line consists of up to 64 Preset
points. Please refer to the instructions below to program a sequence line.
NOTE! Before setting this function, users must pre-define at least two Preset points.
Sequence Settings
Click the Edit button of Sequence Setting to enter the menu.
110 / 130
Loading ...
Loading ...
Loading ...