Loading ...
Loading ...
Loading ...
English 19
Operation (NZ8*****7**)
Using the touch buttons
To operate the touch buttons, touch the desired button with the tip of your pointed
nger until the relevant displays illuminate or go out, or until the desired function
is activated.
Ensure that you are touching only one button when operating the appliance. If
your nger is too at on the button, an adjacent button may be actuated as well.
Operating noises
If you can hear.
• Cracking noise: cookware is made of different materials.
• Whistling: you use more than two cooking zones and the cookware is made of
different materials.
• Humming: you use high power levels.
• Clicking: electric switching occurs.
• Hissing, Buzzing: the fan operates.
The noise are normal and do not refer to any defects.
WARNING
Do not use cookware of different size and material.
Using cookware of different sizes or materials may cause noises and vibrations.
NOTE
Using low power levels (1-5) may cause clicking noises.
Initial cleaning
Wipe the ceramic glass surface with a damp cloth and ceramic hob glass cleaner.
WARNING
Do not use caustic or abrasive cleaners. The surface could be damaged.
Operation (NZ8*****7**)
Switching the appliance on
The appliance is switched on using the On/Off
key. Press the On/Off key for
approximately 1-2 seconds.
NOTE
After the On/Off
key has been actuated to switch on your appliance, a power
level must be selected within approximately 20 seconds. Otherwise, the appliance
will switch itself off for safety reasons.
Switching the appliance off
To completely power off the appliance, use the On/Off
key.
Press the On/Off key for approximately 1-2 seconds.
NOTE
After switching off a single cooking zone or the entire cooking surface, the
presence of residual heat will be indicated in the digital displays of the
corresponding cooking zones in the form of an
, two steps for “hot”.
The temperature is lowered,
, wil be disappeared.
Selecting cooking zone and power level
1. For selecting the cooking zone, press the corresponding Control bar.
2. For setting and adjusting the power level, use the Control bar.
Control bar
Control Knob
NOTE
If more than one key is pressed for longer than 8 seconds,
will show in the
cooking zone display.
Loading ...
Loading ...
Loading ...