Loading ...
Loading ...
Loading ...
58
USING THE TABLET
Workshop Tools
n Perform test procedures as directed. Choose Next or Continue, as appropriate, to scroll to the
next screen.
3. For some vehicles, “status” screens display as each phase of the calibration procedure is successfully completed.
Choose Next or Continue, as appropriate, to scroll to the next screen.
n A “results” screen displays when the procedure has completed.
NOTE: If the procedure is stopped due to a communication error, an “advisory”
message display. Choose Exit or
Back, as necessary, to return to the Workshop
Tools screen.
4. Choose Exit or Back, as necessary, to return to the Workshop Tools screen.
EV/HEV/PHEV BATTERY HEALTH
Follow these steps to check the vehicle’s battery and alternator system (or hybrid/EV battery system) to ensure the
system is operating within acceptable limits.
1. Select EV/HEV/PHEV Battery Health, Battery/Alternator Test in the Workshop Tools screen.
n The EV/HEV/PHEV Battery Health, Battery/Alternator Test displays.
n If the vehicle is an electric or hybrid vehicle, the EV/
HEV/PHEV Battery Health screen shows a graphic
representation of the vehicle’s current state of charge
for all battery pack cells.
NOTE: If the Hybrid/EV Battery Test is not supported
by the vehicle under test, an “advisory” message
displays. Choose
Back to return to the Workshop
Tools screen.
n If the vehicle is not an electric or hybrid vehicle, the Battery/Alternator Test menu displays.
2. When you have nished viewing the retrieved information, choose
Back to return to the Workshop Tools
screen.
BATTERY / ALTERNATOR TEST
The Tablet can perform a check of the vehicle’s battery and alternator system to ensure the system is operating within
acceptable limits. Follow these steps to perform a battery check only, or an alternator system (battery and alternator)
check.
Perform a Battery Check Only
If the EV/HEV/PHEV Battery Health, Battery/Alternator Test is selected from the Workshop Tools screen and the
vehicle is not an electric or hybrid vehicle, the Battery/Alternator Test menu displays. Proceed to step 2.
1. Select Battery/Alternator Test, then press OK.
Loading ...
Loading ...
Loading ...