Loading ...
Loading ...
Loading ...
50
USING THE TABLET
OEM Diagnostics
Erase DTCs – refer to [See page 34]
Live Data – refer to [See page 35]
Active Test – refer to [See page 35]
ECU Information – refer to [See page 49]
VEHICLE INSPECTION
Performing a full vehicle scan ensures peace of mind for you and your customers. Many systems do not turn on a light
or places a message on the vehicle’s Diagnostic Information Center, so following this process can help uncover hidden
issues.
A good practice is to perform a pre-scan before any work is done to uncover all issues, then a post-scan once repairs
are complete to conrm the repairs were completed properly. Furthermore, several manufacturers mandate a pre- and
post-scan for all warranty work and insurance carriers require it for pre- and post-collision work.
n Emission Inspection Status - Indicates whether the vehicle is ready for an Emissions Test
(Smog Check) based on DTCs present, Freeze Frame data, Monitor Status, MIL (Check Engine
Light) status, State/Region, and Engine Type. Results are shown as “Pass”, “Fail” or “Warning”.
n Service Check – provides values for Engine Oil Level,
Oil Life Remaining, Brake Pad Life, Transmission
Temperature.
n TPMS - shows the status of the vehicle’s Tire Pressure
Monitoring System (TPMS) and the individual tire
pressures for all tires.
n Warning Light – conrms the ON or OFF status for
the vehicle’s ABS Dash Indicator and Airbag Dash
Indicator.
n System Fault – shows number of DTCs retrieved for all of the vehicle’s systems.
n System No Fault/Available – provides information on which vehicle systems are not reporting
any DTCs and/or it does not support reading DTCs.
n System No Response – shows the systems that the vehicle does not support.
DTC Detail – to view Denitions and status DTCs of all systems.
1. Follow the Scan All Systems steps to connect with the vehicle. [See page 33]
2. From the OEM Diagnostics screen, select the Vehicle Inspection button.
n The Select Business Report screen displays.
3. Choose the Business Report you wish to retrieve, then press OK.
n Diagnostic Report – Provides a report for OBD2 Data, MIL DTC additional Information, Scan
All Systems Data, and Vehicle Care.
n Customer Report – Provides a report for OBD2 Data, Scan All Systems Data, Service Check,
Loading ...
Loading ...
Loading ...