Loading ...
Loading ...
Loading ...
USING THE TABLET
OBD2 Diagnostics
1. From Live Data Mode, select Live Data Menu and press OK.
2. Select Playback Live Data, then press OK.
n The Playback Live Data menu displays.
NOTE: If there is no Live Data currently stored in the Tablet’s memory, an advisory
message shows on the display. Press View LD to return to Live Data mode.
NOTE: When you select Yes from the Record Live Data conrmation screen, the
Tablet enters the “Live Data Playback” mode, and the
Playback Live Data menu displays.
3. Select Continuous Playback or Frame by Frame, as
desired, then press OK.
n The display shows the recorded Live Data, beginning
with the “trigger” frame.
n Only a limited amount of PID data can be displayed on
the screen at one time. If additional PID data is
available, a small arrow is shown on the display. Press
UP and DOWN, as necessary, to view all available PID data.
n When viewing recorded Live Data, look for any irregularities in any of the PID values/signal
information (LTFT %, RPM, MAP, TEMP, etc.). If any PIDs are not within specication, or
irregularities are detected, follow the procedures in the vehicle’s service repair manual to
perform additional troubleshooting and repair.
4. When you select Continuous Playback, the Tablet plays
recorded data at a rate of one frame per 2 seconds.
n Press OK on any selected PID to open a graph view
for that PID.
n Select Pause, to “pause” the Live Data playback.
Select Play to resume the playback mode.
n Select Exit Playback to exit the Live Data Playback
mode and return to the Playback Live Data menu.
n Once playback nishes, the tablet automatically
returns to the Playback Live Data menu.
━ To replay the data again, select Continuous
Playback or Frame by Frame, as desired, then
press OK.
5. When Frame by Frame is selected, you must scroll the
individual frames manually.
n When you have viewed all PID information for the
current frame of Live Data, choose Next Frame or
Previous Frame, as desired.
27
Loading ...
Loading ...
Loading ...