Loading ...
Loading ...
Loading ...
91
FAX FUNCTIONS
Quick On-line
When you use the document feeder to send a multi-page document and there are no previously stored jobs waiting
or in progress (and the line is not being used), the machine dials the destination after the first page is scanned and
begins transmitting scanned pages while the remaining pages are being scanned. This transmission method is
called Quick On-line. When a quick online transmission is being performed, the message display shows "Reading" -
"Dialing" - "Comm." - "Sending" in that order until scanning of the remaining pages is completed. When all pages
have been scanned, "Read End" appears before the above messages appear.
If the receiving party is busy, the quick online transmission will change into a stored transmission job (memory
transmission). (See "Storing transmission jobs (memory transmission)" (p.90).)
If the memory becomes full during a quick online transmission
If the memory becomes full while scanning the first page of a document, the transmission job is automatically
canceled. If the memory becomes full while scanning the second page or a following page, those pages which were
completely scanned will be transmitted.
If the receiving party is busy
If the receiving party is busy, the transmission is temporarily canceled and then automatically re-attempted after a
brief interval. (Two attempts are made at an interval of 3 minutes.*
1
)
If you do not want the machine to re-attempt the transmission, press the [FAX STATUS] key and cancel the job.
(p.93)
*1 The settings can be changed in the system settings. (See
"Recall Setting (Busy)" (p.186))
If an error occurs that prevents transmission
If an error occurs that prevents transmission or the receiving machine does not answer the call within 45 seconds*
2
,
the transmission is stopped and then automatically re-attempted later. One attempt is made at an interval of
1 minute.*
2
) If you do not want the machine to re-attempt the transmission, press the [FAX STATUS] key and cancel
the job. (p.93) This machine also supports error correction mode (ECM) and is set to automatically resend any part
of a fax that is distorted due to noise on the line.*
3
*2 The settings can be changed in the system settings. (See "Ring Timeout In Auto TX" (p.186) and "Recall Set
(Err)" (p.186).)
*3 If the other fax machine does not support ECM or ECM is not operating, error correction will not take place.
The machine is initially set (factory setting) to perform Quick On-line transmission. If desired, you can disable this
function in the system settings. (See "Quick On Line TX" (p.186).) When an original is transmitted using the
following methods, the job will be stored in memory. (Quick On-line transmission will not be performed.)
• Sending a fax from the document glass.
• "SENDING THE SAME DOCUMENT TO MULTIPLE DESTINATIONS IN A SINGLE OPERATION" (p.99)
• "AUTOMATIC TRANSMISSION AT A SPECIFIED TIME" (p.98)
Note
Loading ...
Loading ...
Loading ...