Loading ...
Loading ...
Loading ...
156
TROUBLESHOOTING
MISFEED IN THE MACHINE
To remove a misfeed from inside the machine, open the side cover, check whether the misfeed occurred in "A", "B",
or "C" below, and follow the misfeed removal procedure.
1
Open the bypass tray and the side cover.
2
Check the misfeed location. Remove the misfed paper following the instructions for
each location in the illustration below.
Misfeed in the paper feed area A
1
Carefully remove the misfed paper. Turn the roller rotating knob in the direction of the
arrow to assist in removing it.
Be careful not to tear the misfed paper during removal.
2
Close the side cover.
The message " Clear paper path." will be cleared and copying will be possible.
If paper remains in the bypass tray, remove the paper.
The fusing unit is hot. Do not touch the fusing
unit when removing misfed paper. Doing so may
cause a burn or injury.
When removing misfed paper, do not touch or damage
the transfer belt.
• When closing the side cover, press on around the handle.
• If the message does not clear, check again to make sure that no pieces of paper remain.
Note
If paper is misfed here, go to
"Misfeed in the transport area C"
(p.158).
If paper is misfed here, go to
"Misfeed in the paper feed
area A" (p.156).
If the misfed paper is visible
here, go to "Misfeed in the
fusing area B" (p.157).
Area B
Area A
Area C
R
o
ll
er rotat
i
ng
k
no
b
F
us
i
ng un
it
Warning
Caution
Note
Loading ...
Loading ...
Loading ...