Loading ...
Loading ...
Loading ...
112
Troubleshooting
Troubleshooting
If a problem occurs, click , then [Customer Support] in the menu to visit the following Web site, where
you can find causes and solutions to various problems and answers to frequently asked questions.
If you have a problem, check the following solutions. If the solutions suggested do not correct the problem,
contact your authorized dealer or Brother Customer Service.
Problem Estimated Cause Solution Page
Windows
®
does not start when
you turn on the computer with
the "PE-DESIGN Software
Key" plugged into the USB port
of the computer.
The "PE-DESIGN Software
Key" is plugged in when
Windows
®
is started.
Turn on your computer without the "PE-
DESIGN Software Key" plugged into a
USB port.
Refer to
"Installation
Guide".
The software is not installed
correctly.
An operation not described
in the installation procedure
was performed. (e.g.,
[Cancel] was clicked or the
"PE-DESIGN Software
Key" was removed too
early.)
Follow the on-screen instructions to
correctly install the software.
The message "No PE-DESIGN
Software Key is connected.
Please connect a PE-DESIGN
Software Key." appeared.
The
"PE-DESIGN Software
Key"
is not connected.
Check that the
"PE-DESIGN Software
Key"
appears in the computer's list of
removable storage devices. If it does
not appear, unplug the
"PE-DESIGN
Software Key"
, and then plug it in again.
The information on the
"PE-DESIGN Software
Key"
is corrupted.
Leave it plugged in, and uninstall, then
re-install PE-DESIGN PLUS2.
Refer to
"Uninstalling the
Software" on
page 115.
Loading ...
Loading ...
Loading ...