Netgear XS748T-100NES User Manual

Loading ...

Configure Switching

ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual

2. Launch a web browser.

3. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Change the Default IP Address of the

Switch on page 10.

The login window opens.

4. Enter the switch’s password in the Password field.

The default password is password.

The System Information page displays.

5. Select Switching> LAG > Advanced > LACP Configuration.

6. In the LACP System Priority field, specify the device’s link aggregation priority relative to

the devices at the other ends of the links on which link aggregation is enabled.

A higher value indicates a lower priority. You can change the value of the parameter

globally by specifying a priority from 1 to 65535. The default value is 32768.

7. Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect

immediately.

Set the LACP Port Priority Settings

The LACP port configuration page is used to configure the LACP priority value for the selected

port and the administrative LACP time-out value.

 To configure LACP port priority settings:

1. Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or

connect directly to a switch that is off-network using an Ethernet cable.