Loading ...
Loading ...
Loading ...
Manage Device Security
276
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
11. For this procedure (in which an ACL based on the destination MAC address is created),
configure the following settings:
a. In the Destination MAC field, specify the destination MAC address that must be
compared against the information in an Ethernet frame.
The valid format is xx:xx:xx:xx:xx:xx.
b. In the Destination MAC Mask field, specify the destination MAC address mask that
must be compared against the information in an Ethernet frame.
The valid format is xx:xx:xx:xx:xx:xx.
c. In the Binding Configuration section, from the Direction menu, select the packet
filtering direction for the ACL.
Only the inbound direction is valid.
d. In the Ports and LAG tables in the Binding Configuration section, click each port and
LAG to which the ACL must be applied.
Selected ports and LAGs are marked with a check mark.
e. Click the Add button.
The rule is added to the ACL and is based on the destination MAC address.
12. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Modify an ACL Rule
To modify an ACL rule:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
Destination IPv6 L4 Port
• Destination L4 port (protocol). Specify the destination IPv6 L4 port
protocol.
• Destination L4 port (value). Specify the destination IPv6 L4 port value.
Source IPv6 L4 Port
• Source L4 port (protocol). Specify the source IPv6 L4 port protocol.
• Source L4 port (value). Specify the source IPv6 L4 port value.
ACL Based On Fields
Loading ...
Loading ...
Loading ...