Loading ...
Loading ...
Loading ...
Configure System Information
65
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
6. Configure the following options:
• All. Globally activate or disable all traps by selecting the corresponding radio button.
By default, the Enable radio button is selected.
• Authentication. When authentication is enabled, SNMP traps are sent when events
involving authentication occur. By default, the Enable radio button is selected.
7. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
View the Supported MIBs
This page displays a list of all MIBs supported by the switch.
To view the supported MIBs:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > SNMP > SNMPv1/v2 > Supported MIBs.
Loading ...
Loading ...
Loading ...