Loading ...
Loading ...
Loading ...
Manage Device Security
255
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Manage Port Authentication
Use the Port Authentication page to enable and configure port access control on one or more
ports.
Configure 802.1X Settings for a Port
To configure 802.1X settings for a port:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Port Authentication > Advanced > Port Authentication.
Use the horizontal scroll bar at the bottom of the page to view all the fields. A partial page
capture is shown below.
6. To view more columns, move the gray bar below the table at the bottom of the page to the
right.
The previous figure does not show all columns.
7. Select the check box for the port.
You can also select multiple check boxes to apply the same settings to the selected
ports, or select the check box in the heading row to apply the same settings to all ports.
Loading ...
Loading ...
Loading ...