Netgear XS748T-100NES User Manual

Loading ...

Configure System Information

ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual

3. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Change the Default IP Address of the

Switch on page 10.

The login window opens.

4. Enter the switch’s password in the Password field.

The default password is password.

The System Information page displays.

5. Select System > SNMP > SNMPv1/v2 > Trap Configuration.

The Trap Configuration page displays.

6. Select the check box for the recipient to remove.

7. Click the Delete button.

The trap recipient is removed.

Configure SNMPv1/v2 Trap Flags

Use the Trap Flags page to enable or disable traps the switch can send to an SNMP

manager. When the condition identified by an active trap is encountered by the switch, a trap

message is sent to any enabled SNMP trap receivers, and a message is written to the trap

log.

 To configure the trap flags:

1. Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or

connect directly to a switch that is off-network using an Ethernet cable.

2. Launch a web browser.