Loading ...
Loading ...
Loading ...
Configure Switching
130
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
Configure MST Port Settings
Use the MST Port Configuration page to configure and display Multiple Spanning Tree (MST)
settings on a specific port on the switch.
To configure MST port settings and start the STP migration process for an MST
instance:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching > STP > Advanced > MST Port Configuration.
6. In the MST Select menu, select the MST instance.
7. Select which type of interfaces display onscreen:
• To display physical ports only, click the PORTS link.
• To display LAGs only, click the LAGS link.
• To display both physical ports and LAGs, click the All link.
8. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the interface, or
type the interface number in the Go To Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
Loading ...
Loading ...
Loading ...