Loading ...
Loading ...
Loading ...
Configure Switching
103
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
7. In the Prefix Mask field, enter a value from 9 to 48.
8. In the Group ID field, specify a group ID that allows you to identify the group.
9. Click the Add button.
The MAC address is added to the MAC-based VLAN group.
The following table describes the nonconfigurable information displayed on the page.
Delete a MAC-Based VLAN Group
To delete a MAC-based VLAN group:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> VLAN > Advanced > MAC Based VLAN Group Configuration.
The MAC Based VLAN Group Configuration page displays.
6. Select the check box for the group that you want to remove.
7. Click the Delete button.
The MAC-based VLAN group is removed.
Table 22. MAC Based VLAN Mapping
Field Definition
Group ID The ID of the group.
VLAN ID The VLAN ID that is associated with the group.
Ports The ports that are assigned to the VLAN as a result of MAC-based
VLAN mapping.
Loading ...
Loading ...
Loading ...