Loading ...
Loading ...
Loading ...
Manage Device Security
266
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
Configure Private VLANs
A private VLAN contains switch ports that cannot communicate with each other, but can
access another network. These ports are called private ports. Each private VLAN contains
one or more private ports and a single uplink port or uplink aggregation group. Note that all
traffic between private ports is blocked at all layers, not just Layer 2 traffic, but also traffic
such as FTP, HTTP, and Telnet.
From the Security > Management Security > Traffic Control > Private Vlan menu, you
can access the pages that are described in the following sections:
• Configure the Private VLAN Type on page 266
• Configure Private VLAN Association Settings on page 267
• Configure the Private VLAN Port Mode on page 268
• Configure a Private VLAN Host Interface on page 269
• Configure a Private VLAN Promiscuous Interface on page 271
Configure the Private VLAN Type
To configure a private VLAN type:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Traffic Control > Private Vlan > Private Vlan Type Configuration.
6. Select the check box for the VLAN ID that you want to configure.
Loading ...
Loading ...
Loading ...