Loading ...
Loading ...
Loading ...
Configure System Information
55
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
Configure Green Ethernet Local and Remote Devices
Use this page to view detailed per-port green Ethernet information and to enable or disable
green Ethernet settings on a single port. Using the green Ethernet features allows for power
consumption savings.
To configure green Ethernet local and remote devices:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > Green Ethernet > Green Ethernet Details.
6. From the Interface menu, select the interface.
The selection from the Energy Detect Admin mode menu is fixed at Enable. With this
mode enabled, the port transitions to low power mode during a link idle condition. The
Operational Status field shows whether the energy detect operational status is active or
inactive. The Reason field shows the reason for the operational status.
The selection from the Short Reach Admin mode menu is fixed at Enable. With this
mode enabled, the port transitions to low power mode when the cable length is less than
Loading ...
Loading ...
Loading ...