Loading ...
Loading ...
Loading ...
Configure System Information
54
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
Configure Green Ethernet Interface Settings
Use this page to configure per-port Green Ethernet settings.
To configure the Green Ethernet interface settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > Green Ethernet > Green Ethernet Interface
Configuration.
6. Do one of the following:
• In the Go To Interface field, enter the port using the respective naming convention
(for example, xg1 or l1), and click the Go button.
The entry corresponding to the specified interface is selected.
For more information about naming conventions, see Interface Naming Conventions
on page 22.
• Select the port.
7. From the EEE Mode menu, select Enable or Disable.
The default is Disable. If the EEE mode is not supported, then N/A is displayed.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Loading ...
Loading ...
Loading ...