Loading ...
Loading ...
Loading ...
Configure Quality of Service
218
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
The policy name, policy type, and member class name are stated in the Class Information
section at the top of the page. These fields are nonconfigurable on this page.
10. From the Assign Queue menu, select the queue to which packets of this policy class must
be assigned.
This is an integer value in the range 0 to 7.
11. Configure the policy attributes:
• Drop. Select this radio button to require each inbound packet to be dropped.
• Mark VLAN CoS. Select this radio button to specify the VLAN priority, which you must
select from the menu. The VLAN priority is expressed as an integer value in the range
from 0 to 7.
• Mark IP DSCP. Select this radio button to require packets to be marked with an IP
DSCP keyword code, which you must select from the menu. If you select Other from
the menu, you can enter an IP DSCP value from 0 to 63. The DSCP value is defined
as the high-order 6 bits of the Service Type octet in the IP header.
• Simple Policy. Select this radio button to define the traffic policing style for the class.
A simple policy uses a single data rate and burst size, resulting in one of two
outcomes: conform or violate. You must define the policy as described in the next
step.
12. If you select the Simple Policy radio button, you can specify the traffic policing style for the
class:
• Color Mode. The default color mode is Color Blind. Color classes do not apply.
• Committed Rate. Enter the committed rate that is applied to conforming packets by
specifying a value in the range from 1 to 4294967295 Kbps.
Loading ...
Loading ...
Loading ...