Loading ...
Loading ...
Loading ...
Get Started
23
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
Use these links as follows:
• To display all ports, click the PORTS link.
• To display all LAGs, click the LAGS link.
• To display all ports and LAGs, click the All link.
The procedures in this section describe how to select the ports and LAGs to configure. The
procedures assume that you are already logged in to the switch. If you do not know how to
log in to the switch, see Use a Web Browser to Access the Switch and Log In on page 17.
To configure a single port by using the Go To Interface field:
1. Ensure that the page is displaying all ports, and not only the LAGs.
2. In the Go To Interface field, type the port number, for example xg4.
For more information, see Interface Naming Conventions on page 22.
3. Click the Go button.
The check box associated with the interface is selected, the row for the selected interface
is highlighted, and the interface number appears in the heading row.
4. Configure the desired settings.
5. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
To configure a single LAG by using the Go To Interface field:
1. Click the LAGS link or the All link to display the LAGs.
2. In the Go To Interface field, type the LAG number, for example l3.
For information, see Interface Naming Conventions on page 22.
3. Click the Go button.
The check box associated with the interface is selected, the row for the selected interface
is highlighted, and the interface number appears in the heading row.
Loading ...
Loading ...
Loading ...