Netgear ‎XS748T-100NES - 48-Port 10G Ethernet Smart Switch

User Manual - Page 358

For XS748T-100NES. Also, The document are for others Netgear models: XS728T, XS748T

PDF File Manual, 373 pages, Read Online | Download pdf file

XS748T-100NES photo
Loading ...
Loading ...
Loading ...
Configuration Examples
358
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
The DiffServ feature contains a number of conceptual QoS building blocks that you can use
to construct a differentiated service network. Use these same blocks in different ways to build
other types of QoS architectures.
You must configure three key QoS building blocks for DiffServ:
Class
Policy
Service (the assignment of a policy to a directional interface)
Class
You can classify incoming packets at Layers 2, 3, and 4 by inspecting the following
information for a packet:
Source/destination MAC address
EtherType
Class of Service (802.1p priority) value (first/only VLAN tag)
VLAN ID range (first/only VLAN tag)
IP Service Type octet (also known as ToS bits, Precedence value, DSCP value)
Layer 4 protocol (TCP, UDP and so on)
Layer 4 source/destination ports
Source/destination IP address
From a DiffServ point of view, two types of classes exist:
DiffServ traffic classes
DiffServ service levels/forwarding classes
DiffServ Traffic Classes
With DiffServ, you define which traffic classes to track on an ingress interface. You can define
simple BA classifiers (DSCP) and a wide variety of multifield (MF) classifiers:
Layer 2; Layers 3, 4 (IP only)
Protocol-based
Address-based
You can combine these classifiers with logical AND or OR operations to build complex
MF-classifiers (by specifying a class type of all or any, respectively). That is, within a single
class, multiple match criteria are grouped together as an AND expression or a sequential OR
expression, depending on the defined class type. Only classes of the same type can be
nested; class nesting does not allow for the negation (exclude option) of the referenced class.
To configure DiffServ, you must define service levels, namely the forwarding classes/PHBs
identified by a given DSCP value, on the egress interface. You define these service levels by
configuring BA classes for each.
Loading ...
Loading ...
Loading ...