Loading ...
Loading ...
Loading ...
Configure Switching
123
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
6. Select which type of interfaces display onscreen:
• To display physical ports only, click the PORTS link.
• To display LAGs only, click the LAGS link.
• To display both physical ports and LAGs, click the All link.
7. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the interface, or
type the interface number in the Go To Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the heading
row.
8. From the STP Status menu, select the option to enable or disable spanning tree
administrative mode associated with the port or port channel.
The possible values are Enable and Disable. The default value is Enable.
9. From the Fast Link menu, select whether the specified port is an edge port within the CST.
The possible values are Enable, Disable, and Auto. The default value is Auto, which
specifies that the switch waits three seconds (with no BPDUs received on the interface)
before placing the interface into the PortFast mode.
10. From the BPDU Forwarding menu, configure BPDU forwarding.
The possible values are Enable and Disable. The default value is Disable. When BPDU
forwarding is enabled, the switch forwards the BPDU traffic arriving on this port when
STP is disabled on this port.
11. In the Path Cost field, set the path cost to a new value for the specified port in the common
and internal spanning tree.
Specify a value in the range of 0 to 200000000. The default is 0. When the path cost is
set to 0, the value is updated with the external path cost from a received STP packet.
12. In the Priority field, specify the priority for a particular port within the CST.
Loading ...
Loading ...
Loading ...