Loading ...
Loading ...
Loading ...
Monitor the System
328
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
View the System Resource Utilization
The switch uses Ternary Content Addressable Memory (TCAM) to support packet actions at
wire speed. TCAM holds rules that are produced by various applications. The maximum
number of TCAM rules that can be allocated by all applications on the switch is 2048. TCAM
is used by the following features:
• DiffServe
• ACLs
• Dynamic VLAN assignment (DVA)
• DHCP snooping
Some applications allocate rules upon their initiation. Additionally, processes that initialize
during the system boot allocate some of their rules during the startup process.
The System Resources Utilization page displays the system resource utilization and
maximum number of TCAM entries.
To view the system resource utilization:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Monitoring > Mirroring > System Resource Utilization.
Loading ...
Loading ...
Loading ...