Loading ...
Loading ...
Loading ...
Maintenance
331
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
Reboot the Switch
Use the Device Reboot page to reboot the switch.
To reboot the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Maintenance > Reset > Device Reboot.
6. Select the check box.
7. Click the Apply button.
The switch reboots.
Reset the Switch to Its Factory Default Settings
Use the Factory Default page to reset the system configuration to the factory default values.
All changes that you made are lost. If the IP address changes, your web session might
disconnect.
Note: If you reset the switch to the default configuration, the IP address is
reset to 192.168.0.239, and the DHCP client is enabled. If you lose
network connectivity after you reset the switch to the factory defaults,
see Change the Default IP Address of the Switch on page 10.
Loading ...
Loading ...
Loading ...