Loading ...
Loading ...
Loading ...
Configure Switching
140
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
11. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table displays nonconfigurable information about IGMP snooping for VLANs.
View the IGMP Snooping Table
Use the IGMP Snooping Table page to view all of the entries in the Multicast Forwarding
Database that were created for IGMP snooping.
To view the entries in the IGMP snooping table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> Multicast > IGMP Snooping > IGMP Snooping Table.
The IGMP Snooping Table page displays.
6. In the Search By MAC Address field, specify the MAC address whose MFDB table entry
you want to view.
Enter six two-digit hexadecimal numbers separated by colons, for example,
00:01:23:43:45:67.
7. Click the Go button.
Table 35. IGMP VLAN snooping information
Field Description
Host Timeout The period that the switch must wait for a report for a particular group on a
particular interface before it deletes that interface from the group.
This value is calculated as follows: (Query Interval * 2) + Maximum Response
Time.
MRouter Timeout The period that the switch must wait after sending a query on an interface
because it did not receive a report for a particular group on that interface.
This value is calculated as follows: Query Interval * 2.
Loading ...
Loading ...
Loading ...