Loading ...
Loading ...
Loading ...
Configure System Information
59
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
Use the Device View
For device view information, see Web Browser–Based Management Interface Device View
on page 20.
Configure SNMP
You can configure SNMP settings for SNMPv1/v2 and SNMPv3. The switch software
supports the configuration of SNMP groups and users that can manage traps that the SNMP
agent generates.
The switch uses both standard public MIBs for standard functionality and private MIBs that
support additional switch functionality. All private MIBs begin with a hyphen (-) prefix. The
main object for interface configuration is in -SWITCHING-MIB, which is a private MIB. Some
interface configurations also involve objects in the public MIB, IF-MIB.
From the System > SNMP menu, you can access pages that are described in the following
sections:
• Configure the SNMPv1/v2 Community on page 59
• Configure SNMPv1/v2 Trap Settings on page 62
• Configure SNMPv1/v2 Trap Flags on page 64
• View the Supported MIBs on page 65
• Configure SNMPv3 Users on page 66
Configure the SNMPv1/v2 Community
Only the communities that you define can access to the switch using the SNMP V1 and
SNMP V2 protocols. Only those communities with read/write level access can be used to
change the configuration using SNMP.
Short Reach Admin mode Enable or disable Short Reach Admin mode on the port. With Short
Reach mode enabled, PHY is forced to operate in low power mode
irrespective of the cable length.
Short Reach Operational Status Current operational status of the Short Reach mode.
EEE Admin mode Enable or disable Energy Efficient Ethernet mode on the port. With
EEE mode enabled, the port transitions to low power mode during link
idle conditions.
Table 14. Green Ethernet Statistics Summary information (continued)
Field Description
Loading ...
Loading ...
Loading ...