Loading ...
Loading ...
Loading ...
Manage Device Security
252
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
The following table describes the nonconfigurable data that is displayed.
Remove an Access Control Profile
If you do not want to use an access control profile, you can deactivate it. However, if you no
longer need a profile, you can remove it entirely.
To remove an access profile:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Access > Access Control > Access Profile Configuration.
The Access Profile Configuration page displays.
6. Select the Remove Profile radio button.
7. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Table 54. Access profile configuration profile summary
Field Description
Rule Type The action performed when the rules are matched.
Service Type The service type chosen. The policy is restricted by the service type chosen.
Source IP Address The source IP address of the client originating the management traffic.
Mask The subnet mask of the IP address.
Priority The priority of the rule.
Loading ...
Loading ...
Loading ...