Loading ...
Loading ...
Loading ...
Manage Device Security
281
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
Add a Rule to a MAC ACL
To add a rule to a MAC ACL:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > ACL > Basic > MAC Rules.
The following figure does not show all columns.
6. From the ACL Name menu, select the MAC ACL.
For information about adding MAC ACLs, see Configure a Basic MAC ACL on page 278.
7. In the ID field, enter a whole number in the range of 1 to 50 to identify the rule.
8. From the Match Every menu, select whether each Layer 2 MAC packet must be matched
against the rule:
• True. Each packet must match the selected ACL rule.
• False. Not all packets need to match the selected ACL rule.
9. In the CoS field, specify the 802.1p user priority that must be compared against the
information in an Ethernet frame.
The range of valid values is 0 to 7.
10. In the Destination MAC field, specify the destination MAC address that must be compared
against the information in an Ethernet frame.
The valid format is xx:xx:xx:xx:xx:xx.
11. In the Destination MAC Mask field, specify the destination MAC address mask that must
be compared against the information in an Ethernet frame.
Loading ...
Loading ...
Loading ...