Loading ...
Loading ...
Loading ...
Configure System Information
50
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
user enters test, then test is changed to test.netgear.com to resolve the name). The name
must not be longer than 158 characters.
8. To add a DSN server, do the following:
a. In the DNS Server field in the DNS Server Configuration table, specify the IPv4
address to which the switch sends DNS queries.
b. Click the Add button.
The server is added to the list. You can specify up to eight DNS servers. The Preference
field displays the server preference order. The preference is set in the order in which
preferences were entered.
9. To remove a DNS server from the list, do the following:
a. Select the check box for the server.
b. Click the Delete button.
10. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
11. To refresh the page, click the Update button.
The following table displays DNS Server Configuration information.
Configure and View Host Name-to-IP Address Information
Use this page to manually map host names to IP addresses or to view dynamic host
mappings.
Add a Static Entry to the Dynamic Host Mapping Table
To add a static entry to the local dynamic host mapping table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
Table 10. DNS Server Configuration information
Field Description
ID The identification of the DNS Server.
Preference Shows the preference of the DNS server. The preferences are
determined by the order in which they were entered.
Loading ...
Loading ...
Loading ...