Loading ...
Loading ...
Loading ...
Configure Quality of Service
213
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
The destination and source IPv6 addresses use a prefix length value instead of an individual
mask to qualify them as a subnet addresses or a host addresses. The flow label is a 20-bit
number that is unique to an IPv6 packet, used by end stations to signify some form of Quality
of Service (QoS) handling in routers.
Packets that match an IPv6 classifier are allowed to be marked using only the 802.1p (CoS)
field or the IP DSCP field in the Traffic Class octet. IP precedence is not defined for IPv6.
This is not an appropriate type of packet marking.
IPv6 ACL/DiffServ assignment is appropriate for LAG interfaces. The procedures described
by an ACL or DiffServ policy are equally applicable on a LAG interface.
Add and Configure an IPv6 DiffServ Class
To add and configure an IPv6 DiffServ class:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select QoS > DiffServ > Advanced > IPv6 Class Configuration.
6. In the Class Name field, enter a class name.
The Class Name field also lists all the existing IPv6 DiffServ class names, from which one
can be selected for modification or deletion.
7. From the Class Type menu, select the class type All.
The switch supports only the class type value All, which means that all the various match
criteria defined for the class are satisfied for a packet match. All signifies the logical AND
statement of all the match criteria.
8. Click the Add button.
Loading ...
Loading ...
Loading ...