Loading ...
Loading ...
Loading ...
Menu Reference
The “System” Tab
n
Upload Image by E-Mail
Select this item and the administrator can assign an E-mail address and configure various para-
meters. When audio is detected, event images will be sent to the appointed E-mail address.
Note that to implement this function, one of the streaming MUST be set as MJPEG; otherwise,
this function will be grayed out and cannot be accessed.
The Pre-trigger buffer function allows users to check what happened to cause the trigger. The
Pre-trigger buffer frame rate could be pre-determined. On the other hand, Post-trigger buf-
fer is for users to upload certain amount of images after the audio event occurs.
NOTE! The Pre-trigger buffer generally ranges from 1 to 20 frames. However, the range will
change accordingly if the frame rate of MJPEG on Streaming> Video Configuration is 6 or
lower.
Check the box Continue image upload to upload the triggered images during certain time or
keep uploading until the trigger is off. Select Upload for __sec and enter the duration in the
blank. The images of the duration will be uploading by E-mail when the audio event occurs.
The setting range is from 1 to 99999 sec. Select Upload while the trigger is active to make
the images keep being uploaded to E-mail during the trigger active until the event stops. Set
the Image frequency as the upload frame rate. The setting range is from 1 to 15 frames per
second.
NOTE! Make sure SMTP configuration has been completed. Refer to section Mail for further
details.
n
Upload Image to SD Card
Select this item, and then the images will be uploaded to the SD card periodically. Note that to
implement this function, one of the streaming MUST be set as MJPEG; otherwise, this function
will be grayed out and cannot be accessed.
The Pre-trigger buffer function can define how many images to be uploaded before the
triggered moment. The Post-trigger buffer function can define how many images to be
uploaded after the triggered moment.
NOTE! The Pre-trigger buffer generally ranges from 1 to 20 frames. However, the range will
change accordingly if the frame rate of MJPEG on Streaming> Video Configuration is 6 or
lower.
NOTE! Before implementing Upload Image to SD Card, please make sure that the SD Card
is properly detected and installed. Refer to Storage Management> SD Card> Device
Information for further details.
62 / 120
Loading ...
Loading ...
Loading ...