Loading ...
Loading ...
Loading ...
Once formatting has finished, the camera can use the storage medium for recording.
Connecting Power
Using Power over Ethernet (PoE)
Use a IEEE 802.3bt PoE switch (Class6) and connect the Ethernet cable to the RJ-45 port of the cam-
era.
Using AC or DC
To power up the camera, connect either the AC or the DC power adapter to the power connector
of the camera and the power outlet.
CAUTION! Never connect both AC and DC power since this will cause unforeseeable damage.
Diagram and Pin Definition for AC24V/DC24V Power Connection
Pin Definition
1 DC24V-
2 DC24V+
3 AC24V 1
4 AC24V 2
Connecting Ethernet Cable
Ethernet Cable Connection
NOTE!
n
The length of the Ethernet cable should not exceed 100m/300ft.
n
Check the status of the link indicator and the activity indicator LEDs of the switch. If the
LEDs are unlit, please check the LAN connection.
n
In some cases, an Ethernet crossover cable may be needed when connecting the camera
directly to the PC.
Connection
Connecting Power
21 / 120
Loading ...
Loading ...
Loading ...