Loading ...
Loading ...
Loading ...
Network
To edit the network settings, select System> Network.
Click on Network, there will be a drop-down menu with tabs including Basic, QoS, SNMP, and
UPnP.
Basic
To edit the basic settings, select System> Network> Basic.
This setting page is for setting a new IP address for the camera, configuring other network-related
parameters and activating IPv6 address (if the network supports it).
General
This setting menu is for configuring a new IP address for the camera. To setup an IP address, please
find out the network type first. Contact the network provider for it. Then refer to the network type
and follow the instructions to setup the IP address.
NOTE! If the network type is Point-to-Point Protocol over Ethernet (PPPoE), please obtain the
PPPoE username and password from the network provider.
n
Get IP address automatically (DHCP)
Select the item and click Save to confirm the new setting. A note for camera system reboot
will appear. Click OK and the camera system will restart. The camera will be assigned with a
new IP address. Close the web browser and search the camera through the installer program:
DeviceSearch.exe. Refer to the steps below to connect the camera through “DeviceSearch”
software.
NOTE! Before searching the camera through DeviceSearch.exe, please record the camera’s
MAC address, which can be found on the label or on the package container of the camera,
for later use and identification in the future.
n
Double-click on the program DeviceSearch.exe.
n
After its window appears, click on Device Search on the top. All the finding IP devices will be
listed in the page.
n
Find the camera by its MAC address.
n
Then double-click or right click and select Browse to access the camera directly by the web
browser.
n
A prompt window requesting for the username and the password will appear. Enter the user-
name and the password to login to the camera.
Menu Reference
The “System” Tab
51 / 120
Loading ...
Loading ...
Loading ...