Loading ...
Loading ...
Loading ...
Connection
Camera Cabling
Camera Cabling
The camera is rated IP66 to prevent water from entering the camera. However, water might still enter
the camera if it is being improperly installed. Please make sure the warnings below are strictly fol-
lowed when installing the camera.
n
Place all cables and the adapter in dry and well-waterproofed environments, e.g. waterproof
boxes. This will prevent moisture from accumulating inside the camera and from penetrating
cables.
n
While running cables, slightly bend the cables to a U-shaped curve (see top images in figure
above) to make a low point. This will prevent water from entering the camera along the cables
from above.
n
The cable entry hole of the outdoor mounting kit (see bottom image in figure above) needs to
be sealed with thread seal tape to avoid water from entering the camera.
NOTE!
This camera must be installed by qualified personnel and the installation should conform to all
local codes.
18 / 120
Loading ...
Loading ...
Loading ...